Banner Output Tray Unit MK-761, Attached to C4070 etc

[billp]

Please, if you have attached or used a "Banner Output Tray Unit MK-761", on a C4070 OT512 or RU-518 etc

Was it sturdy & useful?

Or fragile & inadequate?

Just OK?


Running (5000pw) 900mm s/s 90gsm banners via bypass tray (MB-509)

Champagne taste, beer budget

Have used a sheet of corflute previously on C1060...

Appreciate any helpful advice
thanks bill


C4080_C14000_MCO030726B.jpg