Hello all
A customer recently asked me to set up a print driver preset to print from the second tray set to SEF and 2 hole punch the top. I have no problems setting up the driver but when it prints it won't punch. I have tried all binding positions. I can punch on the long edge from the driver and I can punch on the short edge and long edge from the control panel.
I haven't reloaded firmware yet but I was wondering if anyone has seen this issue.
Thanks.
A customer recently asked me to set up a print driver preset to print from the second tray set to SEF and 2 hole punch the top. I have no problems setting up the driver but when it prints it won't punch. I have tried all binding positions. I can punch on the long edge from the driver and I can punch on the short edge and long edge from the control panel.
I haven't reloaded firmware yet but I was wondering if anyone has seen this issue.
Thanks.