If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I appreciate the help. Unfortunately, it looks like either CPU or Base Board needs to be replaced. I'm also receiving error code CE201 at the same time. I'll have to hold on answering until i can resolve this
EDIT: Good news, the ADF setting in Service Mode has appeared. It turns out the grey cable wasn't connected properly to the Base Board. One of the pins on CN8E was skewed but i managed to correct it. I turned off Shading Repair and both errors C8403 nad CE201 are now gone.
Good troubleshooting.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Comment