Fading on the Leading Edge - Konica Minolta bizhub C220

[joaopauloooo]

SKM_C22023121418560.pdf

[dibyendu2008]

Re: Fading on the Leading Edge - Konica Minolta bizhub C220

Have you cleaned Laser unit? What is the status at the time of copying?

[joaopauloooo]

Re: Fading on the Leading Edge - Konica Minolta bizhub C220

Have you cleaned Laser unit? What is the status at the time of copying?

Yes, it did nothing.
The problem is the missing gray on the leading edge, not those white lines all over the paper.

[kirin]

Re: Fading on the Leading Edge - Konica Minolta bizhub C220

Hi, check the position/alignment of the right door , check the contacts of the second transfert (in the door), maybe you need clean it (or scracht it)....

[joaopauloooo]

Re: Fading on the Leading Edge - Konica Minolta bizhub C220

Hi, check the position/alignment of the right door , check the contacts of the second transfert (in the door), maybe you need clean it (or scracht it)....

The contact was full of rust, I cleaned it and now the problem is worst, it was fading from white and now the leading edge is white and suddenly the print appears.
SKM_C22023121515460_0003.jpg

[kirin]

Re: Fading on the Leading Edge - Konica Minolta bizhub C220

Check this pdf
leading_edge.pdf

[joaopauloooo]

Re: Fading on the Leading Edge - Konica Minolta bizhub C220

Check this pdf
[ATTACH=CONFIG]60903[/ATTACH]

This solved the problem, thank you very much!