All the issues with "i" series ??

[KMFLT3CH]

Re: All the issues with "i" series ??

I am curious about which settings you change for the fuser. I've recently gone through educating myself on extending fuser life on Kyocera TaskAlfas, and would be curious about what you've found with the new Konica's, especially with extended sleep settings (ie 60 minutes).

Thanks!

Disable smart fusing control
Increased fusing temp +10 across the board
Set fusing transport speed to 0

[tsbservice]

Re: All the issues with "i" series ??

Disable smart fusing control
Increased fusing temp +10 across the board
Set fusing transport speed to 0

That's exactly what I have planned to do with my ongoing issues on 458e series fusers though I won't touch fusing transport speed for now.

[tech51]

Re: All the issues with "i" series ??

Disable smart fusing control
Increased fusing temp +10 across the board
Set fusing transport speed to 0

Also switch engine switch 13 (I series A3 models only) to on and reboot.

It has to be said that these settings are not specifically to extend the fuser life but to help stop poor fusing.

Regards.

[jwai]

Re: All the issues with "i" series ??

Disable smart fusing control
Increased fusing temp +10 across the board
Set fusing transport speed to 0

How to disable smart fusing control?

[tsbservice]

Re: All the issues with "i" series ??

How to disable smart fusing control?

How about service manual?
If you don't have one I could send to you.

[jwai]

Re: All the issues with "i" series ??

How about service manual?
If you don't have one I could send to you.

I found it on manual, thanks.