Re: Remote Panel via Web Browser Konica Minolta 8 series
Creating a Self-Signed certificate using Page Scope Web Connection
1) Log onto to page scope web connection as an administrator.
Note: Standard password is [1234567812345678]
Click on the security tab
Click on new registration
Create and install a self-signed
certificate is already select, so
just press ok.
Complete all the fields; the
information in this picture is
an example. The information
can be whatever, Just make
sure the email address is the.
Format of an email address
and validity period is 3650.
Click ok and the certificate
will be created and installed.
-
Re: Remote Panel via Web Browser Konica Minolta 8 series
To access the machines remote panel remotely from PC on the same network you will
need to set or check the following three items.
1) The CE password is enabled.
Service Mode> Stop 0>C (CE Authentication) Set to ON.
Note: The CE Authentication button will not be displayed when the remote panel
(Server Settings) is set to ON.
2) Issue and install the self-signed certificate from device certificate setting under
security settings of Page Scope Web Connection. (Details on next page)
3) Set the Remote Panel Server setting to ON
Admin mode > Network Settings > Remote Panel Settings > Server Settings.
Set Use to: ON
Access the remote panel by typing the following address into the web browser.
https:// MFP IP Address :50443/panel/top.htmlLeave a comment:
-
-
Remote Panel via Web Browser Konica Minolta 8 series
Hi,
I want to access MFP's control panel remotely via Web Browser.
In Admin Mode > Network Settings > Remote Panel Setting > Remote Panel Server Setting is not showing?
Is there any software switch to enable this function?
OR Have to update a special firmware for this one?
Please advise!
Thanks
Leave a comment: