Konica Minolta C6500 C0101 Error

[Marsh2]

Hi

can anyone help me please i have a C0101 error code on a C6500 which refers to Paper Feed motor M41 which i have replaced but hasnt worked. It also only seems to happen on duplexing. Has anyone else had this problem.

Cheers Justin

[Marsh2]

Since Fixed was Duplex Control Board if anyone else gets it. Funny it call a Paper Feed Drive motor not related to duplexer.

[Si@danwood]

Chances are it was a blown icp on the adu controller pwb.Now here's the thing..Km uk have released an icp list however they have also put a disclaimer on it saying its for "information purposes onll and recomends) pwb replacement blah blah " said list is in my possesion ask and you shall receive ....Si

[Rohullah]

Re: Konica Minolta C6500 C0101 Error

Since Fixed was Duplex Control Board if anyone else gets it. Funny it call a Paper Feed Drive motor not related to duplexer.

Hi Marsh2
You mean Conveyance drive board? Transmission board?
I have the same problem.

[Phil B.]

Re: Konica Minolta C6500 C0101 Error

Hi Marsh2
You mean Conveyance drive board? Transmission board?
I have the same problem.

this thread has been DEAD for 10 YEARS!!!!!

please stop replying to year old dead threads.