Minolta 2050 error EM2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Diana Goerz (Specialo@telusplanet.n

    Minolta 2050 error EM2

    Could someone tell me how to reset this error message. Thank-you.

    Diana Goerz (Specialo@telusplanet.net)
  • dqydj
    Technician
    50+ Posts
    • Jun 2005
    • 64

    #2
    Re:Minolta 2050 error EM2

    that code isn\'t in the service manual.
    I would guess that you will find it in the owners manual if you still have it.

    Comment

    • wcastelli

      #3
      Re:Minolta 2050 error EM2

      I think it is a dead ram pac(battery dead)

      Comment

      • JustManuals
        Field Supervisor
        5,000+ Posts
        • Jan 2006
        • 9931

        #4
        This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
        from The Internet's largest collection of manuals


        Paul@justmanuals.com

        Comment

        • Hansoon
          Field Supervisor
          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3251

          #5
          If its an EP-2050 than likely the code is M2 meaning that the machine believes that the Waste Toner Container is full depending on the settings in the electronic counters. Not a job for an enduser but for a tech.

          Hans
          " Sent from my Intel 80286 using MS-DOS 2.0 "

          Comment

          • deep
            Trusted Tech
            100+ Posts
            • Jun 2008
            • 208

            #6
            Oh... You guys respond a thread posted 4 years ago.
            Kenny

            Comment

            • JustManuals
              Field Supervisor
              5,000+ Posts
              • Jan 2006
              • 9931

              #7
              well DUH!

              ::embarrassed::

              Comment

              • montana
                Trusted Tech
                • Aug 2008
                • 393

                #8
                hi guys.....it is old issue about older copier.....

                Comment

                Working...