I have a C350 and i Intsalled the Hard drive kit but i still cant use the box option when i push the button on the control panel nothing happens. Is there a software switch or something i missed. Please let me know. Thanks!
-
-
You have to follow the instructions that came with the hard drive.
tech rep mode-->System Input-->Hard Disk-->Set-->END-->Fin Time
cycle the main power
you'll get an error code because the HD is not formatted yet.
tech rep--> machine adj-->mem-hard disk-->hard disk format-->logical format-->Press START KEY-->END-->fin. Time.
cycle the main power
You MUST cycle the main power at these 2 places or you'll have to do it all over again.
Hope this helps. -
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code. Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [2/4].
6 Touch [Box Function].
7 Touch the key for the desired setting.
8 Touch [Enter].
9 Touch [Exit] in the next three screens that appear.
The Basic screen appears again.
Comment
Comment