bizhud 210

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • smiley
    Senior Tech

    500+ Posts
    • Aug 2008
    • 615
    #1

    bizhud 210

    hi guys can anyone help me how to reset the error of this machne call service M2.
    there is no glory without sacrifice
    Tags: 210, call service, life
    • mrwho
      Major Asshole!

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4299
      #2
      Originally posted by smiley
      hi guys can anyone help me how to reset the error of this machne call service M2.
      Enter tech rep mode, go into "Clear Data" and clear the "Supplies Life" counter.

      NOTE: This is a countdown counter - begins at 40000 and counts down to 0, after which is shows the M2 error.
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        • perdana
          Technician
          50+ Posts
          • Jan 2008
          • 62
          #3
          Originally posted by smiley
          hi guys can anyone help me how to reset the error of this machne call service M2.
          M2 Supplies life Count. The initial value is 40k, and countdown system is used.When counter reach 0 M2 will appear.
          To reset, use "Clear Data" of Service Mode.

            Comment

            • smiley
              Senior Tech

              500+ Posts
              • Aug 2008
              • 615
              #4
              hi guys thanks for the reply.is the semulation of the service mode is stop 00 stop 01?
              there is no glory without sacrifice

                Comment

                Previous template Next
                Working...