Konica Minolta C500 (HP 9850)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rusticmountain
    • Jun 2025
    #1

    Konica Minolta C500 (HP 9850)

    I have a machine that keeps misregistering colors. It has a full pm, and i can get it to run if ishut auto adjustswitches off. But when the customer does a belt refresh theemtransfer belt tracks about 1/2 inch to the fromt of tha machime causinf a 45-02.
    Please help
    Tags: 9850, c500, konica, konica minolta c500, minolta, refresh, transfer unit
    • time2fly
      Trusted Tech

      100+ Posts
      • Jul 2008
      • 134
      #2
      This seems to be a problem that happens alot with these machines. Make sure all of the sensors are clean. Also clean the transfer belt unit all the rollers everything. If that doesn't work, go through all of the adjustments again. Destroy the copier if all else fails, in my opinion these copiers are the biggest piece of SH#* ever made, REALLY

        Comment

        • mrwho
          Major Asshole!

          Site Contributor
          2,500+ Posts
          • Apr 2009
          • 4299
          #3
          Take a look at this thread. It's a more recent machine, but the transfer unit is very very similar.
          ' "But the salesman said . . ." The salesman's an asshole!'
          Mascan42

          'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
          Ibid

          I'm just an ex-tech lurking around and spreading disinformation!

            Comment

            Previous template Next
            Working...