BizHub 350 Error Code C0214

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ameritek
    • Jul 2025
    #1

    BizHub 350 Error Code C0214

    I am getting an error code C0214 on my BizHub 350 machine. Can anybody help me?
    Tags: 350, bizhub, c0214, code, error, failure, pulled, wrong
    • BR549
      Senior Tech

      Site Contributor
      100+ Posts
      • Apr 2009
      • 111
      #2
      LCT shifting failure. I had that code a couple weeks ago. Somebody had loaded paper 8.5x11R instead of 8.5x11.

        Comment

        • mrwho
          Major Asshole!

          Site Contributor
          2,500+ Posts
          • Apr 2009
          • 4299
          #3
          Could also be some broken gears that lift the paper at the front of the drawer. Take a close look - I got one of those that the broken gear looked okay until a closer inspection.
          ' "But the salesman said . . ." The salesman's an asshole!'
          Mascan42

          'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
          Ibid

          I'm just an ex-tech lurking around and spreading disinformation!

            Comment

            • Ameritek
              #4
              Thanks

              I had loaded the paper wrong in the Tray 3. I pulled the paper out by unscrewing the side panel. It worked. Thanks for your help.

                Comment

                • aidil rashidi
                  Technician
                  • Jun 2008
                  • 33
                  #5
                  I faced the same prob on 3 of my bh420..the problem comes from the lift up motor...just change the faulty motor

                    Comment

                    Previous template Next
                    Working...