Di-450, with Pi-5500, scan manual

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3374

    #1

    Di-450, with Pi-5500, scan manual

    Customer like to have a manual with settings to be done to use the scan function of the Di-450. I explained him several times but he still likes to have an "official manual" for this.

    The wanted information is not included in the normal user manual, I recall that I have seen a special user manual for this. Could not find it at KonicaMinolta's website.

    Anybody know where to get it? English language would be fine.

    Hans
    “Sent from my Intel 80286 using MS-DOS 2.0”

  • albasoul06

    #2
    Service & Support | Konica Minolta Business Solutions, U.S.A., Inc.

    Comment

    • Hansoon
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Sep 2007
      • 3374

      #3
      Thanks. I've looked there before but there's not this particular manual nor any instruction sheet how to use the scan function for a Di-450 with Pi-5500.
      There's only one for the Pi-5501

      Hans
      “Sent from my Intel 80286 using MS-DOS 2.0”

      Comment

      • albasoul06

        #4
        Service & Support | Konica Minolta Business Solutions, U.S.A., Inc.

        Comment

        • albasoul06

          #5
          select print controller... not Di 450

          Comment

          • Hansoon
            Field Supervisor

            Site Contributor
            2,500+ Posts
            • Sep 2007
            • 3374

            #6
            Yes, I knew that but thanks anyway. Only the Webinterface has a manual there. I'm (my customer is) looking for which buttons on the copier are to be used and what settings in the display.

            Hans
            “Sent from my Intel 80286 using MS-DOS 2.0”

            Comment

            Working...