Clear Nv Ram od bizhub 420

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • xmasvn
    Technician
    • Jul 2009
    • 70

    #1

    Clear Nv Ram od bizhub 420

    hi every one how to clear nvram of bizhub 420, any one know about this plze help me , because i lost CE password so i think clear that will reset this password

    thanks
  • albasoul06

    #2
    what is CE password ?

    Comment

    • moonwalker3778
      Technician

      50+ Posts
      • Jun 2008
      • 87

      #3
      hi,

      u can clear NV ram,but u said u lost CE password that means u cannot enter in to service mode,then how can u expect to clear NV ram.


      After clearing NV ram u ll face lot of probs especially in the case of bizhub 420.

      Comment

      • xmasvn
        Technician
        • Jul 2009
        • 70

        #4
        i still can go to setting mode by pass through and turn off feature password of admin, but i can't setting CE password to default, i don't know which way to reset this CE password

        Comment

        • albasoul06

          #5
          Utility, Stop, 0, 0, Stop, 0, 1, Stop, 0, C,

          Comment

          • Hansoon
            Field Supervisor

            Site Contributor
            2,500+ Posts
            • Sep 2007
            • 3372

            #6
            This still begs the question: What's a CE password? You mean the tech rep mode password?

            Hans
            “Sent from my Intel 80286 using MS-DOS 2.0”

            Comment

            • xmasvn
              Technician
              • Jul 2009
              • 70

              #7
              Thanks all replays

              Originally posted by albasoul06
              Utility, Stop, 0, 0, Stop, 0, 1, Stop, 0, C,
              that just go through pass you can't not change CE password,

              CE password that root password if some one change this, another can't reset back to default pass, just only turn off feature CEpassword and go directory seting mode

              I reference all CE password in service manual

              "Enter the CE Password (8 digits) on the on-screen keyboard.

              Current Password : Enter the currently using CE Password.
              New Password : Enter the new CE Password.
              Re-Input Password: Enter the new CE Password again.
              NOTE

              with the same letters as well as the password which is same as the previous
              one cannot be changed.


              responsible person of KONICA MINOLTA. "

              so how come reset this pass if another service man forgot it, that mean what i want
              by the ways could some one share for me the service manual of bizhub420, i realy need that service manual my email nguyentanan@gmail.com

              one more time thanks all of replay

              Comment

              • moonwalker3778
                Technician

                50+ Posts
                • Jun 2008
                • 87

                #8
                u cant do anything if u forget the password,first of all without CE pass u cant enter in to service mode.the one of the two possibility is to replace OACB.first one KM knows.

                Comment

                • xmasvn
                  Technician
                  • Jul 2009
                  • 70

                  #9
                  Originally posted by moonwalker3778
                  u cant do anything if u forget the password,first of all without CE pass u cant enter in to service mode.the one of the two possibility is to replace OACB.first one KM knows.
                  could you explain more OACB thanks

                  Comment

                  • moonwalker3778
                    Technician

                    50+ Posts
                    • Jun 2008
                    • 87

                    #10
                    Over all control board dear

                    Comment

                    • xmasvn
                      Technician
                      • Jul 2009
                      • 70

                      #11
                      have you got service manual of bizhub 420 i will exchange Toshiba 163part and manual

                      Comment

                      • kesserling

                        #12
                        nvram recover

                        hello

                        You can send me your nvram
                        I program it and after i send you the nvram
                        ksearchlink@gmail.com

                        bye

                        Comment

                        • xmasvn
                          Technician
                          • Jul 2009
                          • 70

                          #13
                          Originally posted by kesserling
                          hello

                          You can send me your nvram
                          I program it and after i send you the nvram
                          ksearchlink@gmail.com

                          bye
                          where r u, how can i send it to you or you can teach me how to do this i do it by myself

                          thanks my man

                          Comment

                          • tonduc

                            #14
                            If you stay in VN, I can help you. Just give me more information about you or contact with me, my email : tonduc@soeco.com

                            Comment

                            • kesserling

                              #15
                              Clear Nvram

                              Hello

                              First i cannot give the way for clear the Nvram because it's secret and secondly it's very hard do that without a special equipement
                              If i reset the password the total counter don't change it's that you would
                              Thanks for a quick reply

                              Comment

                              Working...