can this machine achieve printing quality similar to offset printers .any calibration required.
thanks
thanks
-
-
-
Agreeing with si again
Similar to offset, but not the same.
The "weakness" of the laser printer is the consistency. It will not be able to run very large jobs and produce colours as accurately as well controlled offset press.
So running hundreds pages will not be a problem, but don't expect the 6501 to produce tens of thousands of perfectly alike prints, day in, day out.
The whole point and advantage of the laser printer is it's ability to run smaller jobs profitably because it's more dynamic.
Having said that, calibrate the machine for running Line1 to get very good consistency. I bet this will compete with an "average" offset production, since offset machines are only as good their controllers.Comment
-
What is this a lovefest? Nice to know i am not talking "BOLLOX"Agreeing with si again
Similar to offset, but not the same.
The "weakness" of the laser printer is the consistency. It will not be able to run very large jobs and produce colours as accurately as well controlled offset press.
So running hundreds pages will not be a problem, but don't expect the 6501 to produce tens of thousands of perfectly alike prints, day in, day out.
The whole point and advantage of the laser printer is it's ability to run smaller jobs profitably because it's more dynamic.
Having said that, calibrate the machine for running Line1 to get very good consistency. I bet this will compete with an "average" offset production, since offset machines are only as good their controllers.
Comment
Comment