Can anyone test out printing a sheet of 12.99 x 19.00 stock - custom size defined.. and have if print to the main tray of the finisher. If you tell it std. 13 x 19 - i know it won't allow you to select to print to the main tray in the finisher - something about the european size of 330mm wide - that will allow you to select the main output tray.
I am considering the purchase of a basic finisher.. and am getting conflicting information if i can only output to the sub-tray for this size.
According to the driver -- it can output to the main tray... the spec's say otherwise -- so I guess the only way to try out is to test it. The dealer in my area doesn't have any configured with this finisher (FS520)
Hope someone can help by testing this out..
I am considering the purchase of a basic finisher.. and am getting conflicting information if i can only output to the sub-tray for this size.
According to the driver -- it can output to the main tray... the spec's say otherwise -- so I guess the only way to try out is to test it. The dealer in my area doesn't have any configured with this finisher (FS520)
Hope someone can help by testing this out..
Comment