KM Bizhub PRO C500

[Guest]

Client removed server from back and placed MB and all hard ware in desk top case.
need plug-in configuration for front panel PWR, RST, HDD, PWR LED+/- on an X3eTY-05 system w/interface card.

[Stirton.M]

not very clear what you are trying to ask.

Want to clarify what it is you are trying to do?

[mawker]

Bizhub pro c500

Client disassembled the print server attached to the back of the C500.
they reassembled the mother board and hdd but failed to connect the selector switch(s) for restart, power, HDD-Led, etc....... So your's truly has the fun of telling them they screwed up. ( not really), Yet very much wanted to.

So now I have to figure out the connection sequence for the various switches.

the mother board is a (EfI)-FIERY print controller (Fiery X3ety-05).

any ideas or just S O L.

[Stirton.M]

email me at mike.stirton@gmail.com

For whatever reason, I suspect copytechnet doesn't like to compete with free distribution of FREE manuals which they charge people for, I cannot upload the files it seems.

There are primarily 3 types of controllers. I suspect you are using the IC-405 which is a flat square grey box that is attached to the back of the C500 by 4 mounting screws.

I can email you 3 different fiery model service manuals, the IC-302, IC-405 and the IP-901 in a zip file of about 8MB.