trapps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • trapps
    Technician
    • Mar 2007
    • 14

    #1

    trapps

    Are there any Konica Minolta techs that have lots of experience on colour 8050 and c500 machines?
  • mikeena
    Branch Technical Manager

    100+ Posts
    • Mar 2007
    • 220

    #2
    c500

    well i dont kn ow if you would say i know them very well aS THEY HAVE THERE OWN MINE but i have spent my share of time on them.. it seems as if no two machines are alike. atleast so far. What can i help you with

    Comment

    • trapps
      Technician
      • Mar 2007
      • 14

      #3
      c500 and 8050 jamming and quality issues.

      Thanks for your response, had one that was giving j 92-01 codes.I looked at drives, fuser exit, sensors in inverter etc.Eventually cleaned rollers on adu,m/c run for 2 to 3 weeks and problem resurfaced.Another thing on these m/cs, the quality issue with pitch lines how is that resolved, any suggestions would be appreciated.
      Thanks.

      Comment

      Working...