Bizhub C350 aka Imagistics CM3520

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mansart
    Senior Tech

    Site Contributor
    500+ Posts
    • Apr 2009
    • 852
    #1

    Bizhub C350 aka Imagistics CM3520

    I have access to Konica firmware, my question is can I uses KonicaMinolta firmware on the Imagistics rebox? Has anyone done this ????

    Could someone please send me firmware for Imagistics CM3520?

    TIA
    Tags: aka, bizhub, bizhub c35, c350, cm3520, control panel, identical, imagistics, konica, konica minolta, konicaminolta, minolta
    • Stirton.M
      All things Konica Minolta

      1,000+ Posts
      • Oct 2009
      • 1804
      #2
      I have my doubts it can be done. You could try flashing it by going through the motions with the flash card. If it is able to flash the machine, you will see firmware updated choices available on the control panel. If not, the machine will give you an error response on the screen. If it is the latter, you need the proprietary firmware. If the former, you can flash the machine with KM firmware.

      Anything beyond that I cannot say for certain if the code will properly initialize the machine without it throwing any proprietary fits. It "should" be virtually identical, except with proprietary logos on the display panel and perhaps some configuration options changed.
      "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
      ---Groucho Marx


      Please do not PM me for questions related to Konica Minolta hardware.
      I will not answer requests or questions there.
      Please ask in the KM forum for the benefit of others to see the question and give their input.

        Comment

        • konicaminolta
          skibum
          • Oct 2010
          • 12
          #3
          The FW for Imagistics is exactly the same as Konica Minolta, done many of those. You can even convert those to KM by installing a different eprom.
          I used to be with it, then they changed what it was. Now what I'm with, isn't it, and what's it seems weird and scary to me.

            Comment

            Previous template Next
            Working...