c6500 print quality

[rs4u]

here is another example of what we are dealing with..

[Stirton.M]

here is another example of what we are dealing with..

Uh...what sample?

[TonerMonkey]

Uh...what sample?

Getting blank prints now by the look of things ...........

[rs4u]

sorry dont know why it didnt upload the file but here is another example..

if you notice you will see redish, yellow lines in the copy.

[Gerry.Fitz]

side to side

Hi ya
Wrong corona units
Gerry

[rs4u]

so the lines are from the corona units? cause these are brand new corona units in the machine.

[Stirton.M]

check the slit glass for all your colours.

Corona units, check to make sure there is no dust from talc in them. Use a can of air to clean each if they do have dust.

Check your transfer unit, specifically the second transfer rollers, both on the belt and the ADU.

Also, check against the paper. Is the correct weight being programmed for that stock? Try some other paper stock and see if this is reproduced on those.

Adjust transfer voltages.