If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi There,
I also have C500 with S300 Fiery I can print the "Colorcal Measurement Page" and when I replaced measurement page with "Kodak Gray Scale" on platen glass as I used to do before and I tried to calibrate it says "Measurement Page is not Detected" I cleaned the optic still no luck. By the way The fiery calibrate with another C500 and it's not the cable either. And as you mentioned above about USER AUTHENTICATION or COPY TRACK on the machine. I'm not sure what you mean exactly by those can you please give me more information or explain me how to do these steps. I would greatly appreciated any help as I'm totally dependent your given information now,
Thanks in advance.
Oz
Are you in Ontario Ca? We service that area I'd be more than happy to come out on a service call bases and help you out.
Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
Comment