If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am getting C1106 on a konica minolta 602 and 750 machine, its something to do with the finisher and stapler movements any ideas or has anyone had this and found a solution cheers
check if staple cartridge is seated correctly - maybe blocking stapler from correct movement. C1106 has to do w/M11 stapler movement motor -stapler not return to home position. Test M11 in 47-mode and also check HP sensor(s).
Comment