C220 image problem.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • minimerlin
    Senior Tech

    Site Contributor
    500+ Posts
    • Nov 2007
    • 851

    #1

    C220 image problem.

    Hi all,
    Got a C220 just installed last week , customer reports first print in a 2 page document is much lighter than the 2nd! Also if a multi page document sent to print then pages 1,3,5,7 etc are all lighter than the even number pages! I have seen prints, did internal print all OK. As are print driver test pages. PostScript driver is in use, same problem from any program not just Word! Copies are fine

    Any suggestions?
    Please do not PM me without asking first.
  • Stirton.M
    All things Konica Minolta

    1,000+ Posts
    • Oct 2009
    • 1804

    #2
    Originally posted by minimerlin
    Hi all,
    Got a C220 just installed last week , customer reports first print in a 2 page document is much lighter than the 2nd! Also if a multi page document sent to print then pages 1,3,5,7 etc are all lighter than the even number pages! I have seen prints, did internal print all OK. As are print driver test pages. PostScript driver is in use, same problem from any program not just Word! Copies are fine

    Any suggestions?

    Try and see if this problem shows on PCL driver.

    Verify the driver they are using is correct one for that machine. Reinstall it if in doubt.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

    Comment

    Working...