konica minolta bizhub 210 c14a3 error

[javier4065]

Hello friends This copier doesn,t work , display says C14a3 ERROR What Should I do to solve it? THANKS.

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals


Paul@justmanuals.com

[jimmyj]

C14A3 Error Code

Make sure the CCD, Exposure Lamp, Inverter Board and Control Board are all working correctly. Then check the horizontal and vertical alignment of the CCD(Three adjusting screws located on the lens assembly)-Place the machine under a light source.Put a piece of paper against the CCD to check where the beam of light falls. It should fall in the middle of the sensor. Use the adjusting screws to make the adjustment. Don't loosen the screws marked in green.

[montana]

hi...scaning lamp faulty......

[javier4065]

konica minolta bizhub 210 c14a3 error

thanks friends I cleaned the white mark under the glass .It was all.