have no power to feeder..checked all fuses on power source pwb.dont think mft pwb has fuses.repl adf main pwb and nothing no power coming in.?
-
-
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals
Paul@justmanuals.com -
Which feeder? AFR-17 or AF-9? They are hooked up differently.
Hans“ Sent from my Intel 80286 using MS-DOS 2.0
“
https://www.copytechnet.com/images/smilies/biggrin.pngComment
-
the ARF 17.everything else works on the machine.Last edited by Guest; 11-06-2009, 12:37 PM.Comment
-
Hi the fuse is a little bobbin type fuse (looks a bit like a capacitor) that can be accessed by removing the fan at the back, if I remember correctly its the one nearest the fuserside.The Wizard
To the Pessimist the glass is half empty
To the Optimist the glass is half full
To the copier engineer...
The wrong glass has been supplied, it should be 50% smaller HahaComment
-
it ended up being power source board. thanxComment
Comment