Konica 7165 Code SC29-01

[Guest]

I have a copier which intermittently gives the code SC29-01. Generallt followed by "Call for Service". I am unable to locate this code in my documentation. Any assistance will be appreciated.

[ebm]

See T.A.D. TAUS0648968EN00 in KMBS's SSD Knowledge base for procedures regarding SC29-01 code.

[copyguy5]

Thanks for the details. I do not have access to the Knowledge Base. Could you possibly email me the notes on the code or give me instructions on viewing the Knowledge Base? Thank you fo any assistance
copyguy5

[CMB]

Process
abnormality
F29-01 Dirt correction failure of the Dmax sensor
during maximum density adjustment.
If this error is detected 10
successive times, the error code is displayed.
TSCB (toner control
sensor board)

PRCB (printer control board)