Konica Minolta C250P-Service Mode

[Guest]

I was wondering how to get into the service mode of a Konica Minolta C250P. I know how to get into the Konica Minolta C250, but have no idea how to begin on the 250P. Any help would be much appreciated.

[Kanini2k]

You need a special program to get into the service menus, I think it's called SimWin and is downloadable from the KMBS. I think there's some different versions for each macine model.
You connect a computer with LAN cable directly to the printer (or I think it works trough a router also) and set the computer IP to an internal address, then turn on the printer holding down (menu I think it was) a button and then you start the SimWin program and you can use it to adjust the printer, like on a copier (you see the same screen as on a copier LCD). This is the way at least on the 353P, so I guess it's the same...

[kmcopier]

you can enter the service menu also from the small display panel of the P version

[digivision]

dear fnd,
i need simwin software for c252p, if u have pls send 2 me,i have firmware for all toshiba estudio models.
thanks & best regards

[RRodgers]

dear fnd,
i need simwin software for c252p, if u have pls send 2 me,i have firmware for all toshiba estudio models.
thanks & best regards

Helo cind sirs, I has 500 moneys. Let's make happy and trade in this great changing.