KonicaMinolta Color

[pepper38_cnd]

Is anyone else out there experiencing the KM color machines asking for Image Transfer Belt at around 112K when they are rated for 300K?

[JSC]

The life of Transfer units and drums are down to revolutions or distance, not page count, the 300k is if the cutomer is runing it at what Konica Minolta think is the aveage use. Which is why we fuse all or transfer belts and chip the iu's.

[mitchl]

The life of Transfer units and drums are down to revolutions or distance, not page count, the 300k is if the cutomer is runing it at what Konica Minolta think is the aveage use. Which is why we fuse all or transfer belts and chip the iu's.

How are you doing your chip re-sets? They should have a re-set tool in the not to distant future is what I'm being told much like the 351/450 unit..........I'm keeping my fingers crossed as the cost of supplies plummets with one of these things.

[JSC]

We have a re-set tool for the CF 1501,2002,350,450 etc and another one for C250,252,300 etc

[mitchl]

We have a re-set tool for the CF 1501,2002,350,450 etc and another one for C250,252,300 etc

Do you have the manufacturer of the reset tool for the 250/352 or a email address, phone number?...........I'll buy that thing today! I didn't realize that someone had made one yet as the company that I got the 351/450 tool from is still working on theirs. Please let me know!

[JSC]

My mistake re-setter for C250/252 only NOT c300/352.

I have sent you some info.

[mitchl]

My mistake re-setter for C250/252 only NOT c300/352.

I have sent you some info.

where did you send it, here (PM) or my email? I dont want it to get caught by the spam filter I use if you sent it VIA email.

[kyoceradude]

The monica boxes for Kyocera Mita, if the length of paper is over 8.6" it will count as 2 on the life meters. No geting around it. If you have a customer that makes letter r booklets that blows on consumables. We also have a rechipper to reprogram image unit chips...

[JSC]

where did you send it, here (PM) or my email? I dont want it to get caught by the spam filter I use if you sent it VIA email.

email & PM

[Scott_Lewis]

I'm interested in the rechipping for konica-minolta IU's. Especially the color units.

For most of the machines, I'm able to bypass the count limits. Haven't found it for any of the color machines. On the other hand, it is only recently that I've done much with color. Our senior tech used to handle all of the color. Now, it is a free for all.

Scott

[wagon]

Hello all!

I build and sell a chip resetting tool for cf2001/cf3102/cf2002/c350/c351/c450. (None for C250 / c352 yet). It is $900 Australian plus shipping. Email me at reprogrammer.shoreelectronics@westnet.com.au.

Thanks!

Kendall.

[mitchl]

email & PM

Got it and thanks, just waithing on them to reply so I can buy one!