Bizhub 3510 IU Side Part #?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • xpress
    Technician

    50+ Posts
    • Jun 2008
    • 63

    #1

    Bizhub 3510 IU Side Part #?

    As we were taking a drum off a IU unit for a 3510 the plastic pin snapped off

    Any part numbers for ordering the side of the unit? Again its the side with the plastic pin, and the sun guard attached. trying not to get a whole unit since we were installing a new drum to it anyways.


    Thanks
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3372

    #2
    This happens often, we just drill a hole inside the drumshaft and sidecover and put a thin metal rod (or 2mm long screw) in it fixed with super glue as reinforcement. This part is not separate available.

    When doing rebuilds we preventively do this mod cause they tend to break too easily in the field.

    Hans
    “Sent from my Intel 80286 using MS-DOS 2.0”

    Comment

    Working...