bizhub 222,smb scan?

[Toxic]

Can someone explaine how to set machine to smb scan works?
I have about 10 computers and bizhub 222 conected in lan over switch.
On all of them have static ip.
I installed printer drivers on all and that is working fine but i can't figure out how to set up scaning.
I assume that smb scan is easiest way but if you have some better way please tell me and how i do that.

Thanks in advance

[kmcopier]

Go to the webpage of the machine or on the control panel of the machine. got the scan tab and make a entry select SMB enter the ip number of the PC and at path give in the shared foldername.

[Toxic]

I was on the machine about one week ago and i can't remember all things what i have tried but i think that i have not seen "scan to smb" or just "smb" anywhere in options.
I remember that i find options scan to ftp and scan to email but not scan to smb.
Is it possible that I have to make some settings on machine (except ip adress) to smb works?
I am going on Monday to try to solve this and i hope to find solution for this until then.

[Toxic]

I can't remember have i tryied just like you explaine but i am going to try like you say.

Thanks!