Bizhub C352 high toner consumption

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stu-stu-stu
    • Jun 2025

    #1

    Bizhub C352 high toner consumption

    Hi,

    I have a Konica Minolta Bizhub C352 which seems to using excessive toner. I recently printed 1,250 copies (4 colour letterheads with 5% coverage) and filled the dump bottle.

    The service manual says things like cleaning the TCR sensor window on the underneath of the imaging unit. What do these look like?

    What other things could I check for that could be causing this high toner consumption, I'm going through toner really quickly.

    Thanks
    Stu
  • stu-stu-stu

    #2
    Any thoughts on this guys? My dump bottle looks like pure toner!

    Cheers

    Comment

    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947

      #3
      How many copies are on the unit? Might be a bad IU for that color. That would do it.
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

      Comment

      • stu-stu-stu

        #4
        140k but it's multiple colours too. Any other ideas? It's costing a fortune to run

        Comment

        • kmcopier
          PSP

          100+ Posts
          • Oct 2008
          • 183

          #5
          First check your coverage ratio on the C352. if this is the same as your opion check when the C352 makes the pre drive and open one of the doors.
          also do this in a run and the transfer if there is also toner between the copies on the belt
          Check then the transferbelt if there is toner on it, if so replace the HV.

          Comment

          • n3o
            Technician
            • Jan 2010
            • 38

            #6
            i might have the same problem, can i ask what is HV ?

            Comment

            Working...