Konica 7013

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • White_Toner
    Technician

    50+ Posts
    • Aug 2009
    • 71
    #1

    Konica 7013

    Dear sirs!
    After turning on the lamp carrige is moving to the right side and goes back. Then indicator "ALARM" light on the panel and message "call service please" appears on the bottom of the screen and dynamic beeps few times.
    I see this mutifunction copier first time since last few years, because Konica is not usual in my region. What can i do? Help please...
    Tags: call service, diagnose, help please, konica, mfg, mrwho
    • TheOwl
      Service Manager

      Site Contributor
      1,000+ Posts
      • Nov 2008
      • 1732
      #2
      Without an error code, this could be a little difficult to diagnose.

      It could be a problem with anything in the machine.
      Please don't ask me for firmware or service manuals as refusal often offends.

        Comment

        • White_Toner
          Technician

          50+ Posts
          • Aug 2009
          • 71
          #3
          to TheOwl

          Thanks! But may be you know the way to look the code? May be push any key or combination of keys, like in Toshiba machins for example...
          The next question is: ALARM and CALL service appears after copier starts initialization (carriage start to move, fan is turning on) but the exp. lamp doesn't light and main motor not work. Is it normal, that lamp doesn't light?

            Comment

            • Stirton.M
              All things Konica Minolta

              1,000+ Posts
              • Oct 2009
              • 1804
              #4
              you can download the user manual from this page...a link near the top...just answer a couple dumb questions(really easy and not intrusive to ask for anything) and the link becomes available.

              Free Konica Minolta All in One Printer owners manuals, user guides & how to instructions | ManualsOnline

              I briefly looked through the user manual and according to that, you can try running a few scans to "dry out" any humidity...but if that doesn't get rid of the alarm, you'll have to get a KM tech out to look at it. And near as I can tell, these machines are discontinued products, so if you need any parts replaced to repair it, you are likely out of luck in that end. Perhaps it is time the device saw a recycling yard and you found something newer for basic copies and faxes. the KM C10 and C20 fall in that category.
              "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
              ---Groucho Marx


              Please do not PM me for questions related to Konica Minolta hardware.
              I will not answer requests or questions there.
              Please ask in the KM forum for the benefit of others to see the question and give their input.

                Comment

                • White_Toner
                  Technician

                  50+ Posts
                  • Aug 2009
                  • 71
                  #5
                  to Stirton.M

                  Thanks for Free office product owners manuals, user guides & how-to instructions | ManualsOnline. I'll read user manual and later inform about result. Good luck!

                    Comment

                    • mrwho
                      Major Asshole!

                      Site Contributor
                      2,500+ Posts
                      • Apr 2009
                      • 4299
                      #6
                      - Press Program Key, *, 6
                      - Press > key until "Service Call" appears on the LCD
                      - Press Enter

                      There should be a message telling the cause of the error. Press STOP to exit this mode.
                      ' "But the salesman said . . ." The salesman's an asshole!'
                      Mascan42

                      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                      Ibid

                      I'm just an ex-tech lurking around and spreading disinformation!

                        Comment

                        • White_Toner
                          Technician

                          50+ Posts
                          • Aug 2009
                          • 71
                          #7
                          to mrwho:
                          Grand merci!!! Error was heating. IT's work now:-)

                            Comment

                            • mrwho
                              Major Asshole!

                              Site Contributor
                              2,500+ Posts
                              • Apr 2009
                              • 4299
                              #8
                              Glad it worked.

                              Now just hang around and try to help whoever you can!

                              Cheers!
                              ' "But the salesman said . . ." The salesman's an asshole!'
                              Mascan42

                              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                              Ibid

                              I'm just an ex-tech lurking around and spreading disinformation!

                                Comment

                                Previous template Next
                                Working...