Banner Printing in C6501

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • adipletosu
    #16
    Is not necessary to reiterate nothing. I know official version.
    But the real version is another: this machine is capable to print banner.

    The problem is: this machine is not capable to counter banner.
    I print one document 330x515mm and machine countered A4.
    Surprising, isn't?

    Konika-Minolta is not pleased to print on banner and counter A4.
    My situation (and for more other KM clients) I pay for any copies (depends on size of copies), so if I print banner and machine counter A4 is not ok for KM (I pay less).

    And is more arguments: the older machine (C650) is capable and the newer (6501) is not capable?

    Originally posted by Stirton.M
    OK.

    I will reiterate ONCE more


    Solution ID TAUS0700390EN* Solution Usage 2
    Description
    Is banner printing supported?
    Solution
    Banner printing is not supported on the bizhub PRO C5500/C5501C6500/C6500P/C6501/C6501P/C65hc. This specification cannot be changed. All product
    change requests for this feature will be denied.



    This pulled straight from a tech service bulletin from technical support site downloaded today.

      Comment

      • adipletosu
        #17
        Originally posted by herrmann
        You are right with the PRO version, but not with the SMART version, as i said before... but, adipletsou, there are changes in service mode necessary, and if your tech refuses to do it, there is no chance for you. I will refuse to tell you as a non tech how to enter service mode and mess evtl. the whole mashine up.
        Tks for nothing Herrmann. I resolved the situation.
        And enter in service mode is not a mystery as you think.
        Tks again

          Comment

          • Stirton.M
            All things Konica Minolta

            1,000+ Posts
            • Oct 2009
            • 1804
            #18
            Banner printing is not supported on the bizhub PRO C5500/C5501C6500/C6500P/C6501/C6501P/C65hc. This specification cannot be changed. All product
            change requests for this feature will be denied.
            "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
            ---Groucho Marx


            Please do not PM me for questions related to Konica Minolta hardware.
            I will not answer requests or questions there.
            Please ask in the KM forum for the benefit of others to see the question and give their input.

              Comment

              • Stirton.M
                All things Konica Minolta

                1,000+ Posts
                • Oct 2009
                • 1804
                #19
                Originally posted by herrmann
                You are right with the PRO version, but not with the SMART version, as i said before... but, adipletsou, there are changes in service mode necessary, and if your tech refuses to do it, there is no chance for you. I will refuse to tell you as a non tech how to enter service mode and mess evtl. the whole mashine up.
                I am not aware of any "SMART" version of this machine. SSD does not reference the item in any shape or form, which would suggest that the variant you speak of is not available in all regions.
                "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
                ---Groucho Marx


                Please do not PM me for questions related to Konica Minolta hardware.
                I will not answer requests or questions there.
                Please ask in the KM forum for the benefit of others to see the question and give their input.

                  Comment

                  • Mr Spock
                    Vulcan Inventor of Death

                    1,000+ Posts
                    • Aug 2006
                    • 2064
                    #20
                    Originally posted by adipletosu

                    And is more arguments: the older machine (C650) is capable and the newer (6501) is not capable?
                    The 650 and the 6501 are totally different machines. The 6500 and the 6501 are closer to each other.
                    And Star Trek was just a tv show...yeah right!

                      Comment

                      • Mr Spock
                        Vulcan Inventor of Death

                        1,000+ Posts
                        • Aug 2006
                        • 2064
                        #21
                        Originally posted by herrmann
                        SMART version is with the "little" RIP ic 408, with maximum the little paper deck and copy tray or max one finisher.

                        No special firmware.
                        I think this is the Lite/basic version in the USA.
                        And Star Trek was just a tv show...yeah right!

                          Comment

                          • Stirton.M
                            All things Konica Minolta

                            1,000+ Posts
                            • Oct 2009
                            • 1804
                            #22
                            Originally posted by Mr Spock
                            The 650 and the 6501 are totally different machines. The 6500 and the 6501 are closer to each other.

                            Not to mention that the C650 is a newer machine.
                            "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
                            ---Groucho Marx


                            Please do not PM me for questions related to Konica Minolta hardware.
                            I will not answer requests or questions there.
                            Please ask in the KM forum for the benefit of others to see the question and give their input.

                              Comment

                              • seniortech
                                Trusted Tech

                                100+ Posts
                                • Dec 2007
                                • 180
                                #23
                                Originally posted by Mr Spock
                                I think this is the Lite/basic version in the USA.
                                I look after two C6501 machines which are only used for banner printing to print book covers. both have the IC303 Fiery (free standing) LU202 deck and output tray only which has been modified to cope with the longer paper size. My customer only uses the bypass for banner printing. once the relevant dipsw settings have been enabled the machine will banner print without any problems. Customer is really happy with both machines and generally run service to service without a call...

                                  Comment

                                  • kamalovitch
                                    Junior Member
                                    • Jun 2009
                                    • 6
                                    #24
                                    Re: Banner Printing in C6501

                                    Hello. I have a problem when I want to print several banners. The 2nd is stuffing. If you have a solution? Thank you

                                      Comment

                                      Previous 1 2 template Next
                                      Working...