Konica 7050 error 35-1

[ADS]

I need help does someone know how to reset this code. Or how to fix it

35-1

[Flash]

Go into the 25 mode address 47 and change back to a 0.

[ADS]

hello, now i don't have any display on the copier????

Just to check i hold down 25 then press on go into the p mode then scrol down to 47 and hit print to set to zero?

thanks

[dogsbody]

The way I do it is enter 25 mode, press P, 4, 7, P, 0, start.

[konitech]

7050

check for a bound main motor or paper feed drive motor if you've got a combination of a blanking screen with a 35-1....otherwise, work the code.....either way, you'll still have to reset it