Di2010 BH2010 Service Mode Entry

[Solotime]

OK what am I missing here. Upon entering the usual stop 0 0 stop 0 1 from the meter count screen I get a blank screen with a box in the middle like it is waiting for a code?
This is a running 2010..the only thing I did was remove the finisher option from the machine.
Thanks in advance for any help.

[Cantechman]

Usually all zero's do the trick.

[Solotime]

Tried all zero's, and 12345678, 9727272...etc. Any k,ey required after the zero's maybe? what threw me is according to the svc manual i should be in the svc mode after stop 0 0 stop 0 1 with Nothing required aftef that

[TheOwl]

After you have entered in your service code, you then touch 'END' up in the top right hand corner.

[Solotime]

Thats what I needed....thank you sir! Apparently I did not hit end after entering the zero's.