bad superpost magenta on cf3102

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • acl
    Technician
    • Feb 2010
    • 32

    #1

    bad superpost magenta on cf3102

    Hi,
    excuse my bad English, I wrote from France. I will present my problem.
    I have a misregistration (bad superpost) of magenta on my copies. Not on the whole length of the copy, but like a wave.
    For example, I when I duplicate an A4 on A3, the left side has shifted and right side ok, or vice versa, or is to throw and after a moment code P21 appears.
    I have the hanger the belt & unit yellow image, magenta image unit, I clean quadri hopper, the belt, the sensor chip stacking, but the default always come back after about 2000 copies .
    Do you have any suggestions.
    He seems not to have default engine, or belt, or the image units.
    I have no more idea !!
    I await your help.
    thank you in advance.

    " request costs only moment of embarrassment, do not be embarrassed to ask it all his life."
    japanese mind
  • RockETop
    Curmudgeon at large

    100+ Posts
    • Apr 2007
    • 171

    #2
    Take the transfer belt out a few inches, move the shutter and clean the color registration sensors with a q-tip.

    Comment

    • acl
      Technician
      • Feb 2010
      • 32

      #3
      Originally posted by RockETop
      Take the transfer belt out a few inches, move the shutter and clean the color registration sensors with a q-tip.
      Thank for your help, and excue my too long answer's time, but i've done this process by the past, but the trouble is always here.

      I disassemble the led's ramp block, but no way. I don't see any trouble.

      I think for a trouble on the image unity with a vibration, or belt's flaw, but i have change both pieces and the problem still alive.

      I notice that the Image Unity magenta will be full. then i disconnect the toner apport magenta to see if the "AIDC" sensor will be broken, but after a moment, i have a message, that the unit was empty. then the AIDC seems to be good.

      I clean the color pastille and color registration cell (sensor), but any way too.

      i join a pdf file to show the trouble.

      thanks
      Attached Files

      Comment

      • Morlock49
        Trusted Tech
        100+ Posts
        • Mar 2009
        • 166

        #4
        it looks like the magenta print head is going faulty, 1 maybe 2 led registers on the way out. Swop out the magenta printhead and see if that cures the problem
        Sorry folks, reputation removed by Just Manuals, because he's a sad little wanker

        Comment

        • connecticcut
          Technician

          50+ Posts
          • Feb 2010
          • 53

          #5
          il faut nettoyer la transfert belt avec un chiffon (P21)

          Comment

          • acl
            Technician
            • Feb 2010
            • 32

            #6
            Thank you.

            I try to do it tomorrow, and i send you a message.

            your welcome

            Comment

            • acl
              Technician
              • Feb 2010
              • 32

              #7

              Comment

              Working...