Bizhub c250 i error c-d201

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • xeroprint
    Technician
    • Nov 2008
    • 20
    #1

    Bizhub c250 i error c-d201

    Hello
    I have problem with bizhub c250. All time show error c-d201.
    I don't go to service mode.
    Please help me.
    Tags: bizhub c250, lef, mfp board, wrong
    • selig67
      Trusted Tech

      100+ Posts
      • May 2008
      • 156
      #2
      Description
      C-D201 (CD201) at power up and unable to clear the code.
      Solution
      CAUSE:Failed memory; memory in the wrong slot.
      SOLUTION: Perform the Memory bus check in the Tech Rep Mode (State confirm, Memory Bus), for the scanner and Printer.Check and reseat each of the
      memory slots on the MFP board. Remove one-at-a-time and perform the memory bus check.
      DIMM 0 = 256MB (p/n 4037 6076 01)
      DIMM 1 = 256MB
      DIMM 2 = 128MB
      Replacefailed memory as necessary.

        Comment

        • ck1
          Trusted Tech

          250+ Posts
          • Apr 2008
          • 485
          #3
          can we use PC Ram to do it ?

            Comment

            • Stirton.M
              All things Konica Minolta

              1,000+ Posts
              • Oct 2009
              • 1804
              #4
              to my knowledge, you cannot...the memory cards themselves are keyed to the slots
              "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
              ---Groucho Marx


              Please do not PM me for questions related to Konica Minolta hardware.
              I will not answer requests or questions there.
              Please ask in the KM forum for the benefit of others to see the question and give their input.

                Comment

                Previous template Next
                Working...