Konica bizhub 7228

[ironpsur2000]

I have one that is printing out garbage. I have loaded the drivers on the pc's, and setup the TCIP. With the KM drivers we just get garbage, but with a Xerox driver we get the test print page then a bunch of garbage. I have tried HP 4 drivers but again just garbage, and I have reloaded the K/M pcl drives, and I get one or two lines of garbage on the first sheet and then several blanks Any Ideas?

The computer operating systems are xp and vista

[ironpsur2000]

Sorry looks like I posted in the wrong section. I have duplicate in connectivity

[RockETop]

If you are using PS drivers without the PS option on the 7228 controller, you get garbage. Try PCL drivers if you haven't already.

[RRodgers]

If you are using PS drivers without the PS option on the 7228 controller, you get garbage. Try PCL drivers if you haven't already.

That right there is probably your solution.