CF3102

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • williamsluu
    Technician
    • Mar 2010
    • 11

    #1

    CF3102

    Hi all,

    Control panel show Magenta and Cyan Imagine units need to be replaced, but when I went into utilites, it shows Magenta and Cyan FULL, and the Black and Yellow have about 10% left.

    Any ideas
    Thank you

    William
  • KEVIN900
    Copier Ninja

    100+ Posts
    • Oct 2009
    • 200

    #2
    The bar graph goes from "no bars" when a new unit is installed, and fill up as it is used. Like the opposite of your gas gauge on your car. When you install a new unit, the bar graph is clear. It fills as it's being used. Sounds like the black & yellow are new.
    Kevin900

    Comment

    • williamsluu
      Technician
      • Mar 2010
      • 11

      #3
      Thank you Kevin
      That's it.
      William

      Comment

      Working...