bizhub250 c5352 error code

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DOE
    Trusted Tech

    250+ Posts
    • Mar 2010
    • 258
    #1

    bizhub250 c5352 error code

    bizhub 250 that had a c2557 code. i changed developer and when f8 was preformed came up with a c5352 which says its cooling fan. could not find this fan. manual has it in top half. is fan the problemor something i might have done chamnging dev. any help would be apreciated as i have not worked on this model but a couple times and am not real familiar. did take it apart quite a bit looking for this fan. thank you
    Tags: 250, 352, bizhub, bizhub 250, c25, c2557, c53, code, cooling, couple, developer, error, error code, familiar, fan, half, help, manual, model, paper, side, top, transfer
    • fixthecopier
      ALIEN OVERLORD

      2,500+ Posts
      • Apr 2008
      • 4714
      #2
      The main fan would be in the right side door behind the transfer/ transport section. Sometimes a small piece of paper can stop it from moving.
      The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

        Comment

        • DOE
          Trusted Tech

          250+ Posts
          • Mar 2010
          • 258
          #3
          Thanks for the help I will try looking there

            Comment

            • liam
              Junior Member
              • Jun 2010
              • 7
              #4
              C5352

              I have the same problem on a B250 and I have replacd the cooling fan behind the Transfer section and still no result! Does anyone have any other suggestions????

                Comment

                • suso73os
                  Technician
                  • Apr 2008
                  • 38
                  #5
                  According to the manual the problem is the M5 cooling fan motor, there is other fan near it, the M6 cooling fan but the trouble code for it is C5353, and this is the UI cooling fan.

                    Comment

                    • DCPS
                      Trusted Tech

                      100+ Posts
                      • Mar 2008
                      • 116
                      #6
                      PWB-A is defective. Check ICP3 on it. If it's open then, IC26 on this board is shorted (MTD2003F). I had that twice 2 years ago.

                        Comment

                        Previous template Next
                        Working...