fiery firmware for IC401

[scooter]

does anyone have the firmware for the firey ic401 and the parallel port accelerator?

thanks alot!

[mikeena]

well scooter i dont know if you can use this on anything but a knoinaminolta so im going off of no. but konicaminolta has not released any firmware downloads as of yet.

[Scott_Lewis]

well scooter i dont know if you can use this on anything but a knoinaminolta so im going off of no. but konicaminolta has not released any firmware downloads as of yet.

Maybe I'm looking at the wrong thing. But, I count 17 patches and the v2.0 system software.

Don't know why EFI can't bundle some of those patches together. What a PITA to do so many little ones when they could make it one or two bigger ones.

[mikeena]

dont know whne i goto konicaminoltas website it tells me there is none where are you getting them from maybe they have them located somewhere else

[Scott_Lewis]

dont know whne i goto konicaminoltas website it tells me there is none where are you getting them from maybe they have them located somewhere else

I just log onto www.mykonicaminolta.com and follow the links for downloads (drivers, EPROMS ........) from the Library page or the SSD home page.

What site are you going to?

[mikeena]

i logged into the same one and it said 0 thats funny

[mitchl]

I have what your looking for with the patches already done, get me an email address and I'll send them to you.

[mikeena]

michaelkeena@gmail.com

thanks

[MrCMYK]

the KM site may not have Firmware for the IC401, But it does have system software v2.0 and the patches that you speak of. Go to the SSD site, click on drivers & firmware. scroll down to downloads and enter IC401. A plethora of files will show.

[Scott_Lewis]

i logged into the same one and it said 0 thats funny

I see what is happening here. I'm talking about System Code and you are talking about Firmware.

I haven't ever seen any 'firmware' for the Fiery, only 'system code'. Seems the 'firmware' is always for the copier and sometimes the finisher and other non-fiery accessories.

Wouldn't mind being enlightened if otherwise.

[mitchl]

I see what is happening here. I'm talking about System Code and you are talking about Firmware.

I haven't ever seen any 'firmware' for the Fiery, only 'system code'. Seems the 'firmware' is always for the copier and sometimes the finisher and other non-fiery accessories.

Wouldn't mind being enlightened if otherwise.

I guess firmware is the wrong term, system software or system ware or OS would probably be more accurate.........I actually think that EFI refers to it as system software.

[mitchl]

If anyone ever gets in a bind and absolutely positively has to have Fiery OS software that you cant find, these guys can sell it to you but it aint cheap.
LANgrafix | Home

[thendral]

Re: fiery firmware for IC401

I know this thread is way old. But I don't want to start another thread for the same.

Any one has or can get me the parallel port accelerator and the system software CD image for the IC-401?

Or better yet, any one has HDD image it will be really helpful.

Thank you very much in advance.

[jotunn]

Re: fiery firmware for IC401

Ghost image:

https://www.dropbox.com/s/30xrjp559irzo4x/IC401.GHO?dl=0

[thendral]

Re: fiery firmware for IC401

Ghost image:
https://www.dropbox.com/s/30xrjp559i...IC401.GHO?dl=0

Hi jotunn,

Awesome. Thanks a lot. Worked great. God bless you.

Thanks
Thendral