Errorcode C-EEE3 C452

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Teqorious
    Technician
    • Jul 2010
    • 17

    Errorcode C-EEE3 C452

    Hi,

    Have anyone got the code "C-EEE3" on a Bizhub C452?

    I have changed the Printer Controller Board, checked the cabels and upgraded the Firmware to the latest but still got the errorcode.
  • jotunn
    Senior Tech

    500+ Posts
    • Jan 2010
    • 503

    #2
    bizhub C652/C552/C452 Mass-Production Program 3rd version Maintenance release (Multi-Language / Ver.G00-B4)

    The following issues are solved in this firmware:
    23) When using MFP from PageScope Authentication Manager, "C-EEE3" occurs and cannot reset the error.

    So try to find and upload to your machine software version
    G00-B4.

    Comment

    • Teqorious
      Technician
      • Jul 2010
      • 17

      #3
      Thanks Jotunn,

      I got the machine to run again.
      What I did was: released the finisher and HDD, resetting the trouble code, upgraded the firmware to G00.B4 and put the finisher and HDD back and started the machine.

      I heard that a bad card in the finisher also can generate this code.

      Comment

      Working...