Bizhub C280 Printing Problem on Mac Os.X 10.6

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • aligis
    Technician
    • Jul 2010
    • 56
    #1

    Bizhub C280 Printing Problem on Mac Os.X 10.6

    Hello every one...

    Very Intersting situation is here we have a one bz c220 with new firmwear. It prints normaly from Windows but when it comes to Mac osx 10.6 do not print.
    like c280 recives print blue lights go on and sudenly goes offffff....
    nothing else.

    i have downloaded the new drivers from KM site v.3.1.1 but nothing is there....
    ant one have any idea
    Tags: bizhub, blue, drivers, lights, mac, osx, printing, prints, windows, wrong
    • aesthetics1
      Trusted Tech

      100+ Posts
      • May 2010
      • 148
      #2
      Print to it with a generic PCL driver, then a generic PS driver, and post your results please.

        Comment

        • emujo
          Field Supervisor

          2,500+ Posts
          • Jun 2009
          • 3009
          #3
          Sounds like user authentication issues. MFP is receiving the job then deleting it because authetication settings are wrong. There are multilpe hits on the knowlege base for this. If you can't figure it out PM me and I'll try to send you a couple of tech tips. Helps to have someone familiar with MAC printing around. EMujo
          If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            • Stirton.M
              All things Konica Minolta

              1,000+ Posts
              • Oct 2009
              • 1804
              #4
              Originally posted by aesthetics1
              Print to it with a generic PCL driver, then a generic PS driver, and post your results please.
              last I recall, there is no PCL driver for the mac.
              "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
              ---Groucho Marx


              Please do not PM me for questions related to Konica Minolta hardware.
              I will not answer requests or questions there.
              Please ask in the KM forum for the benefit of others to see the question and give their input.

                Comment

                • aesthetics1
                  Trusted Tech

                  100+ Posts
                  • May 2010
                  • 148
                  #5
                  You can use the built-in "Generic PCL Driver" that is in the system already. Not specific to the Konica, IE Generic.

                  Sorry for any confusion!

                    Comment

                    • emujo
                      Field Supervisor

                      2,500+ Posts
                      • Jun 2009
                      • 3009
                      #6
                      Ensure Bonjour is enabled, the MAC should see the printer on the network, then point it toward the 10.6 driver you have already downloaded and installed. If you have color locked out, then you will have to make the driver aware if this through the preferances. Emujo
                      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                        Comment

                        • darren5972
                          #7
                          Many thanks Emujo

                            Comment

                            Previous template Next
                            Working...