konica1216

[cliffhangers]

Hi.i have put so many wrong code on my konica1216 and it's now displaying p26.please how can i reinstall the system.help me.thanks.

[montana]

DESCRIPTION: P26 displayed after resetting the PM counter. SOLUTION ID: 51,887
SOLUTION: CAUSE: The L-detect was not performed before resetting the PM counter.
SOLUTION: Perform the L-detect adjustment (47 mode, output code 51, press start/print). The copier
should cycle for approximately 2 minutes. At the end of the adjustment, 51 should be displayed. If 26 is
displayed, perform the L-detect adjustment again.

[deep]

Hi cliffhangers,

Tell us more what you had noticed or done before the P26 Error Code. The more detail, the best.
We need your information to break the code.