Minolta di200 wont come to ready

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jan 2009
    • 327

    Minolta di200 wont come to ready

    Hey all, hate to bother you for this as I'm the minolta di go-to guy in my area, but I'm not sure about this problem. Machine turns on, the picture of the copier appears in the screen, and thats it. I seem to remember having this problem once before a couple years ago, but dont remember the fix, I think it might have been the main board or the memory chip. Any ideas before I start swapping boards? (& no, it wont go into service mode, its just locked up) tia
  • Tom
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jan 2009
    • 327

    #2
    Just thought I'd let you know since nobody else had any ideas either that I went out & reseated the connectors on the main board & reseated the memory chip last week & haven't heard back from the customer, so I guess that did it.

    Comment

    Working...