I Recently moved this unit Bizhub C450 to another office and now all that happens is the start button flashes and will the unit will not make copies or prints-- any suggestions to try ?? Thanks 
-
-
Call a local service tech to troubleshoot this. Likely you did something wrong like unplugged something when the main power was still enabled."Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
-
thanks, i am local the local service tech that was called and i am looking for advice on how to trouble shoot this----Comment
-
Nice!! RTFSMLaughing......Comment
-
your PWB-SIF board is dead...happens all the time when options are disconnected before machine is properly shut down and unplugged from the outlet.Comment
-
Since the MFP was moved, the fax board (if installed) may have backed out of its slot. BTW, if you are a KM tech you should be able to access all this info on the knowledge base...might save you some time in the future. EmujoIf you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.Comment
-
We have the same problem on a C253, also after the customer moved the machine to a new loctaion.
So far we have checked the connection to the total counter and changed MFP Controller PWB and Printer Controller PWB.
Will try Power Supply next, or does anyone have another suggestion?Comment
Comment