minolta di 620 polyester films

[cristian]

1155 3838 01
1155 3861 02
1155 3860 02

Seems that neither Minolta , nore Katun, do not manufacture any more the polyester films for MINOLTA DI 620.Did anyone knew some sort of material who could replace the polyester films ? Also the thickness? For the fixing we could use some double adhesive type temperature resistant.

[jotunn]

All of the parts mentioned in your post are still available in Europe - they are in official Konica Minolta pricelist, so they should be available also in other regions like US and Asia.

[cristian]

try to order this

All of the parts mentioned in your post are still available in Europe - they are in official Konica Minolta pricelist, so they should be available also in other regions like US and Asia.

I have tried to order 1 pc 1155-3861-02 + 1 pc 1155-3860-02 , and i have receive 2 pcs 1155-3860-02, 4 ( four) dealers reply to me that one of this polyester film is not in production anymore.Also, the holder 1155-3831-01, i have try to order it , but also is not producing any more.So , you can see , more and more...And also seems that the price list from MINOLTA , is not the same for all countries... Serious company, isn t it?
If you know someone from MINOLTA, you can communicate them , both with all "my good wishes"....I must work now with broken parts , with glue on them...
PS: I m from Romania.

[jotunn]

Seems possible that those parts are not available anymore, because the machine is more than 10 years old, and as I remember 2 years ago there was a "last chance" program for ordering parts for such old machines (but don't remember if there was Di620 in it).
However I will try to talk with friends from Minolta to clear the situation.

[fixthecopier]

Yes the 520/ 620 was on that list.

[jotunn]

Not so fortunate, 'cause there are still many of them in the field.
Which one of the newer machines would work 10+ years? ;/

[cristian]

Regarding the polyester films, indeed there are not in production anymore, any of them.Could you find , or anyone knows the technical denomination for this material (polyester film- for example MYLAR POLYESTER FILM or MELINEX POLYESTER FILM) and the thickness?

[copy40]

i have all 3 of these brand new..where are you based??? martin

[cristian]

i have all 3 of these brand new..where are you based??? martin

Piatra Neamt/Romania.A little bit far....Anyway,i will find the material (90% think is MYLAR OR MELINEX), i will apply an double autoadhesive tape thermoresistant , and i will post the results...

[cristian]

I have 2 machines with 3 mil copies , 2 others with 4,5 mil copies and another 2 with 5 and 6 mil copies.The machines will resist until 7-8 mil copies at least.I have allready baptise them : camels.