Bizhub 600

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copycommerce
    Technician

    50+ Posts
    • May 2008
    • 65
    #1

    Bizhub 600

    Hello,

    We have the following strange situation with one biz 600.The machine is in ready state we place several documents for copy,the scanning completes and the machine says rdy to accept another job without printing the documents.After a turn off/on the machine starts to copy without problems.Anyone has some ideas what may cause this behavior?
    Tags: 1155, 600, bizhub, bizhub 600, documents, job, printing, scan, scanning
    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947
      #2
      Originally posted by copycommerce
      Hello,

      We have the following strange situation with one biz 600.The machine is in ready state we place several documents for copy,the scanning completes and the machine says rdy to accept another job without printing the documents.After a turn off/on the machine starts to copy without problems.Anyone has some ideas what may cause this behavior?
      Are you sure the "store copy" box is not selected?
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • copycommerce
          Technician

          50+ Posts
          • May 2008
          • 65
          #3
          Originally posted by RRodgers
          Are you sure the "store copy" box is not selected?
          lol ofcourse is not selected :S

            Comment

            • tech51
              Senior Tech

              500+ Posts
              • Jan 2009
              • 846
              #4
              Have you tried a firmware re-load?

                Comment

                • Cleveland Tech
                  Technician
                  • Oct 2010
                  • 22
                  #5
                  I ended up having to replace both the cf cards (image and system) I have one right now that has gone through 3 sets of cards. I have put a network port surge surpressor on it and seems to be better.

                    Comment

                    • BIG PAPA
                      Da Boss

                      100+ Posts
                      • Jan 2010
                      • 234
                      #6
                      We had one do the exact same issue, we switched out the drum unit from a used machine and the problem has not returned. Try TCSB.
                      sigpic

                        Comment

                        • copycommerce
                          Technician

                          50+ Posts
                          • May 2008
                          • 65
                          #7
                          Originally posted by BIG PAPA
                          We had one do the exact same issue, we switched out the drum unit from a used machine and the problem has not returned. Try TCSB.
                          We gonna check that out,and if not try the firmware reload.

                            Comment

                            Previous template Next
                            Working...