Can't Print from MAC OS 10.6 ( SnowLEopard ) to Minolta CF 2002?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • BigDoorStudio
    Technician
    • Feb 2010
    • 20
    #1

    Can't Print from MAC OS 10.6 ( SnowLEopard ) to Minolta CF 2002?

    Every time I send a job from an Intel Chip MAC running MAC OS X.6 it goes through the motions sending but never appears in the print que?
    Tags: 200, 2002, job, mac, minolta, print, running, secondary, send, sending, time
    • HORSE
      Trusted Tech

      100+ Posts
      • Mar 2008
      • 186
      #2
      Either try updating to OSX 10.6.4 or download this update for your mac EFI - Support - Software & Drivers Download
      Laughing......

        Comment

        • BigDoorStudio
          Technician
          • Feb 2010
          • 20
          #3
          Thanks Horse. I give that a try.

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009
              #4
              I have little knowledge of the CF2002, (before my time with KM) but there is no driver listed for anything above 10.2.x. I looked at the spec sheet for this MFP and it doesn't list a secondary (Fiery) controller either. If I'm wrong, let me know and I'll look for any additional info. Emujo
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                • Mr Spock
                  Vulcan Inventor of Death

                  1,000+ Posts
                  • Aug 2006
                  • 2064
                  #5
                  Originally posted by emujo
                  I have little knowledge of the CF2002, (before my time with KM) but there is no driver listed for anything above 10.2.x. I looked at the spec sheet for this MFP and it doesn't list a secondary (Fiery) controller either. If I'm wrong, let me know and I'll look for any additional info. Emujo
                  The cf2002 has the following as network controllers.

                  CN3101e 4334612 Embedded Print Controller (Minolta)
                  CN3102 Pro 960837 Fiery X300 External Print Controller V.2.0
                  CN3102e 4336712 Embedded Print Controller (EFI)

                  From what I can see at myKonicaminolta the cn3101e only has windows drivers. The cn3102 has mac drivers up to 10.5.x and they have not had any new drivers since 2007.
                  And Star Trek was just a tv show...yeah right!

                    Comment

                    • BigDoorStudio
                      Technician
                      • Feb 2010
                      • 20
                      #6
                      Re: Can't Print from MAC OS 10.7 ( LION ) to Minolta CF 2002?

                      You were the one who helped me last time I had updating issues MAC OSX machines, so I thought you might have run into the same problems I'm having now. Let me know if you have any tricks? Thanks again in advance.

                      Originally posted by HORSE
                      Either try updating to OSX 10.6.4 or download this update for your mac EFI - Support - Software & Drivers Download

                        Comment

                        Previous template Next
                        Working...