C6501 Constantly says warming up..

[Guest]

Hiya..

we have a c6501 and it constantly says Warming up , so we cannot print anything..

No error codes, temps sensors been changed and all temps are ok..

Whole new fusing units exchanged and also new ac control board....



any one have any ideas on this issue.......

[HORSE]

There is already a thread on this issue http://www.copytechnet.com/forums/ko...p-problem.html

[nwpmikey]

problem solved... it was something to do with laser power, not 100% sure what the exact error was......

[danny gade]

long warm-up time

There is already a thread on this issue http://www.copytechnet.com/forums/ko...p-problem.html

try to check the sensor in conveyance lever it might be dirty.